• Mega2560 Pro ATmega2560-16AU

Embedded version of Mega 2560 CH340G / ATmega2560-compatible with Mega 2560 board. Built in ATmega2560 microcontroller and CH340G USB-UART interface chip.

The plate has a compact size of 38x55mm. It is a good solution, to make your final project in proto-board welding.

Plate for functionality similar to Mega 2560. It is an embedded plate, but just as stable, and uses the original ATmega2560 (16 MHz) chips.

The board used the CH340G chip as a UART-USB converter. When you work on the 12 MHz frequency, giving a stable result of the exchange of data (it is necessary to install drivers in the computer).

Mega PRO (Embed) 2560 CH340G / ATmega2560-connects to the computer through the microUSB cable (used for Android smartphones (almost all)).

You can supply power on board through the MicroUSB connector or to power the heads. The voltage regulator (LDO) can treat the incoming voltage from 6 V to 9 V (crest 18 V) DC. Output current for 5 V-around 3.3 Ma, for V-approximately 800 mA (keep in mind that the higher the input voltage, the lower the outgoing current). That will provide reliable power for most of your initial projects.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Mega2560 Pro ATmega2560-16AU

  • Product Code: 0295
  • Availability: In Stock
  • 21.90€


Related Products

Tenstar Robot Mega 2560 R3 (micro USB)

Tenstar Robot Mega 2560 R3 (micro USB)

Viena iš populiariausių valdiklių plokščių MEGA 2560. Mikrovaldiklis: ATmega2560-16AUDarbinė įt..

17.50€

4 channel 5v relay shield module

4 channel 5v relay shield module

Relay Shield (ie 5V Quad Relay Module) is a small current signal control power equipment commonly us..

7.50€

Tags: Mega2560, Pro, ATmega2560-16AU, embed